57
Wake Up by PCI Card
Default: Disabled
If you enable this item, it allows activity on an add-in card in one of the PCI slots
to resume the system from a power-saving mode.
Power On by Ring
Default: Disabled
If this item is enabled, it allows the system to resume from a software
powerdown or a power-saving mode whenever there is an incoming call to an
installed fax/modem. You might have to connect the fax/modem to a mainboard
Wake On Modem connector for this feature to work.
Wake Up On LAN
Default: Enabled
If this item is enabled, it allows the system to resume from a software
powerdown or a power-saving mode whenever there is an incoming traffic to a
network (LAN) adapter. You might have to connect the LAN card to a mainboard
Wake On LAN connector for this feature to work.
Resume by Alarm
Default: Disabled
If this item is Enabled, it allows you to set a date and time alarm that will
automatically resume the system from a software power down. When you enable
this feature, new setup items appear to let you set the alarm. Date (of Month)
Alarm lets you select a day from 1 to 31. Time Alarm lets you select a time for
the alarm in hours, minutes, and seconds.
Primary IDE 0
Default: Disabled
Primary IDE 1
Default: Disabled
Secondary IDE 0
Default: Disabled
Secondary IDE 1
Default: Disabled
When these items are enabled, the system will restart the power-saving timeout
counters when any activity is detected on any of the drives or devices on the
primary or secondary IDE channels.
FDD,COM,LPT Port
Default: Disabled
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the floppy diskette drives, the serial
ports, or the parallel port.
PCI PIRQ[A-D]#
Default: Disabled
When this item is enabled, the system will restart the timeout counters when any
activity is detected on the Interrupt request lines used over the PCI bus.
