Matrox QuadHead2Go Series – User Guide
17
2
Connect your digital monitors
Connect your monitors to the
HDMI OUT
connectors on your QuadHead2Go unit.
3
Connect to your network
Connect a network cable to the
LAN
(
)
connector on your QuadHead2Go unit.
WARNING:
To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your Matrox product,
carefully remove the DisplayPort cable by
pressing the latch on the top of the DisplayPort
connector while removing the connector.
Note:
To connect your monitors, the overmold (or boot) of the HDMI connectors must
respect the maximum width (0.823 inches/20.9 mm) and thickness (0.452 inches/11.5
mm) stated in the HDMI specifications.
