Matrox Monarch LCS, Руководство пользователя, Страница: 64 / 106

52
Chapter 4, Using the Command Center
and the Matrox Monarch LCS Utils (see “Monarch LCS Utils application” on
page 16 ). This is especially useful when you have multiple Monarch LCS devices
on the same network. To change the name of your Monarch LCS, type the desired
name in the
Device name box, and then click Change .
By default, the Monarch LCS username and password are set to admin . The
device username cannot be changed, however, we do suggest that you change the
device password. To change the Monarch LCS password, enter the current and
new passwords, and then click
Change . For information on resetting the
password to factory default, see “Reset to factory defaults” on page 13 .
Automatic Configuration tab
The Automatic Configuration tab in the Command Center is where you can
export the current Monarch LCS settings to an XML file (called the Monarch
LCS configuration file ), import settings from a previously-created configuration
file, or import settings from the same XML file hosted on a web page.
When you have a Monarch LCS configuration file, you can copy it to a USB
device, connect the device to USB port 2, and then perform a factory reset to
automatically load the settings. For more information on performing a factory
reset, see
“Network connection and IP address” on page 18 .
The option to boot up Monarch LCS with all settings loading automatically from
a USB device, or loading settings from a web page at device reboot, allows you to
deploy other Monarch devices without logging in to the Command Center.