Matrox Monarch LCS, Руководство пользователя, Страница: 28 / 106

16
Chapter 3, Network Connection and Setup
Introduction
The network connection and setup instructions depend on whether you’ll be
connecting Monarch LCS on a network with a DHCP server, such as through a
router, or a network without a DHCP server.
If connecting to a network with a DHCP server, Monarch LCS must be set to
DHCP IP mode. If your network does not have a DHCP server, Monarch LCS
must be set to Static IP mode. By default, Monarch LCS is set to DHCP IP mode.
Once connected to a network, the stream and record settings are specified using
the Monarch LCS Command Center.
To access the Command Center, you can enter the network IP address of your
Monarch LCS device or use the Monarch LCS Utils application
. When
connecting to a network with a DHCP server, the Monarch LCS IP address is
assigned by the DHCP server. In this case, you can use the Matrox Monarch LCS
Utils application to find the Monarch LCS IP address. When connecting to a
network without a DHCP server, you must assign a static IP address to Monarch
LCS. A default IP address is provided when in Static IP mode.
Monarch LCS Utils application
The Monarch LCS Utils application is available for both Mac OS and Windows
systems, and you can use it to do the following:
• Identify Monarch devices on a network and list their IP addresses.
• Open the Monarch LCS web based UI (Command Center) by
double-clicking an identified device on the displayed list.
• Update Monarch LCS firmware (see “Updating the Monarch LCS firmware”
on page 20 ).
• Reboot Monarch devices (see “Device reboot” on page 12 ).
• Download the Monarch SSL security certificate (see “Installing the Monarch
SSL certificate” on page 21 ).
¡ Important It is not recommended to simultaneously update the same Monarch
device using more than one instance of the Monarch LCS Utils. Do not sever the
network connection during the update process.