Matrox is a registered trademark and Monarch is a trademark of Matrox Graphics Inc.
V11471-501-0200 Copyright © 2020 by Matrox Graphics Inc. All rights reserved. Printed in Canada.
• If your system doesn’t have access to a DNS server, use a fixed IP address (such as local host – 127.0.0.1) as
its DNS server. Otherwise, the firmware update process may take a long time to complete.
• Stop all Monarch EDGE encoding processes and close all instances of Monarch EDGE Control Hub.
Updating your Monarch EDGE firmware
1
Download the installation package from
matrox.com/video/downloads
, then run
FirmwareUpdater.exe
.
The Firmware Updater opens.
2
Under
Search for devices
, run an
Automatic detection
for devices
on the same subnet, or a
Manual
detection
if you know the specific
IP address of your device(s).
3
Click one or more of the Monarch
EDGE devices to select them.
4
Under
Update selected devices
,
you can synchronize the time
between devices or reset the
configuration settings before
clicking
Update
to update the
device firmware.
After all updates are complete, you are ready to install Matrox Monarch EDGE Control Hub.
Step 3 -- Install and run Matrox Monarch EDGE Control Hub
After you have the firmware installed, install and run the Monarch EDGE Control Hub application to configure
and control your EDGE devices. The Control Hub version you install must match the device’s firmware version.
1
From your installation package, run
Matrox.MonarchEDGEControlHub.Setup.msi
.
2
Follow the on-screen instructions to install the software.
3
After the software is installed, run Monarch EDGE Control Hub from
Start > All Programs >
Matrox Monarch EDGE Control Hub
.
4
Download the
Matrox Monarch EDGE Series Installation and User Guide
for more details on how to use
Monarch EDGE Control Hub to configure and control your EDGE devices.
Your Monarch EDGE is ready to be used.
Get the latest firmware and other information
Go to www.matrox.com/video/downloads for the latest firmware, documentation, and utilities.
