Matrox Iris GT MIL Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 256

Matrox Iris GT MIL Скачать руководство пользователя страница 15

Inspecting your Matrox Iris GT with MIL package 15

Inspecting your Matrox Iris GT with MIL

package

You should check the contents of your Matrox Iris GT with MIL package when
you first open it. If something is missing or damaged, contact your Matrox
representative.

Base package

If you have purchased Matrox Iris GT with MIL, your package should include
the following:

• Matrox Iris GT.

• MIL DVD.

• Matrox Iris GT Utilities DVD.

❖

Note that your Matrox Iris GT base package does not include any cables, a power
supply, or a manual iris lens. For these items, refer to the Matrox Iris GT starter
kit, described later in this chapter, or contact a Matrox sales representative.

Matrox Iris GT starter kit

The Matrox Iris GT starter kit includes the following:

• Power supply.

• 100/1000 BaseT Ethernet cable with an M12 8-pin connectors.

• Digital I/O and power cable with an M12 male 17-pin connector. Note that this

cable is open-ended.

• VGA/USB cable with an M12 female 12-pin connector on one end, and HD-15

female connector and a USB female connector.

• Breakout board.

• VGA/USB cable with an M12 female 12-pin connector.

• One C-mount12 mm lens.

«
...
13
14
15
16
17
...
»

Содержание Iris GT MIL

































































































































































































































































Отзывы:

Нет отзывов