Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 89 / 160

77
Using the DigiSuite Configuration program
Making permanent or temporary settings
Unless you want your card configuration settings to be effective only for
the current work session, make sure you select Permanent Settings . If you
clear this option, any changes you make (except to audio, storage, or VTR
settings) will be cleared the next time you start your system. This lets you
assign temporary settings to DigiSuite LX.
For example, if Permanent Settings isn’t selected when you click OK , the
video configuration changes you’ve made to DigiSuite LX will be retained
only until you reboot your computer. Once you reboot, your settings will
be returned to their previous state.
Changing default proc amp settings
If you’d like your default proc amp settings for DigiSuite LX to be restored
each time you start the DigiSuite Configuration program, select
Always
Restore Default Settings
. This causes any temporary changes you made
to these settings (either in the DigiSuite Configuration program or another
program) to be cleared the next time you start the DigiSuite Configuration
program.
Alternately, if you don’t select
Always Restore Default Settings
, when
you start the DigiSuite Configuration program you’ll be notified if the proc
amp settings were changed during the current work session. You can then
indicate whether or not you want to use those settings as your new defaults.