Matrix Visionpro, Быстрый старт

Страница: 7 / 18

Matrix VISIONPRO Quick Start 3
Installing VISIONPRO
Preparing for Installation
You must have the following:
• A suitable location to install VISIONPRO.
• Necessary telecom wiring in place, with wall jacks for station lines at the required locations.
• Standard, good quality, twisted pair telephone cables with 0.5 mm conductor diameter.
• A dedicated Power supply outlet close to the system.
• As many standard analog telephone instruments with CLI display to connect as SLT stations.
• A fax machine, if you want to connect one to the SLT Port of VISIONPRO.
• One or more active, analog trunk lines from the CO network, as required.
Well begun is half done; plan your hardware installation well.
• Do not install this product near an area where-
•
it is exposed to direct sunlight, heat, excessive cold or humidity, dust, oil, corrosive
fumes.
• there is a water source (wash basin, tub, shower, pool, sprinkler etc.)
• there is source of electromagnetic noise such as radio equipment, heavy transformers,
faulty electric chokes of tube-lights, device having a faulty coil.
• Ensure proper electrical earth and telecom earth for the safety of the product and persons
handling it.
Getting Started
Unpack VISIONPRO and verify your package contents. In case any of the items is missing or
damaged, contact your Dealer/Distributor.