Matrix T7X-02, Руководство по обслуживанию

Страница: 72 / 97

68
9.13 CoNSole MaST arM rePlaCeMeNT - CoNTiNUeD
CHaPTer 9: ParT rePlaCeMeNT GUiDe
fiGUre H fiGUre i
fiGUre j
fiGUre k
7) Remove the screws holding the console frame to the mast arms with a 6 mm Allen wrench in the openings with arrows (Figure H).
8) Lift the frame from the mast arms and set it aside (Figure I).
9) Use a 6 mm Allen wrench to remove the lower mast arm mounting screws (Figure J).
10)Pullthemastarmfromthesideofthemachine(FigureK).
11) Reverse Steps 1-10 to install a new console mast.
NOTE:
If replacing the right side mast arm, the console cable must be threaded through
it prior to it being mounted to the frame.