Matrix T50x, Руководство пользователя

Страница: 8 / 11

12 13
CHAPTER 5: t50
x
, t50
x
-u T
readmill
s
pecifications
, p
arts
,
and
a
ssembly
G
uides
5.2 T50x, T50x-U MODEL REqUIRED FASTENERS & ASSEMBLEY TOOLS
ASSEMBLY EXPLODED DIAGRAM
CHAPTER 5: t50
x
, t50
x
-u T
readmill
s
pecifications
, p
arts
,
and
a
ssembly
G
uides
5.3 T50x, T50x-U MODEL ASSEMBLY STEPS
•
ATTENTION
After assembly and installation is complete the treadmill will need to be calibrated using the AUTO-CHECK feature found in the manager mode
screen. Please refer to the Matrix treadmill service manual for instructions on how to enter manager mode. DO NOT stand on the belt while the auto-
calibration sequence is in progress.
Prior to assembling the treadmill, unpack all of the contents of the box and make sure that all necessary components are present. Review the
contents of the hardware package for completeness. Contact Matrix customer service to report any missing items.
•
ASSEMBLY INSTRUCTIONS
Please make sure that the power plug is not plugged into the wall outlet while completing the following procedure.
To ensure correct assembly of the treadmill, carefully read and follow these steps:
STEP 1
Z52
Z52
Q53
Z53
Z51
Z51
N07
N06
Z50
Z50
Motor Cover
Console
Swift Controls™ Panel
Frame Base
Foam Armrest
Console Mast
Unscrew the screw (Q53) on each side, and keep the screws. Remove the motor cover.
Pull out the console, antenna coaxial signal and C-SAFE cables and route them through the right console mast. Place the right console mast and then the left
console mast in the console support brackets. Secure the right and left bracket with the 4 screws and 2 washers provided (Z51, Z50). Make sure these screws
are tightened.
Z51
Z51
Z50
Z50
Q53
Z53
Motor Cover