3 |
P a g e
3xe Console Set-Up
1.
On the top keypad type
ENTER 1001 ENTER
to log into the Manager Mode. Press the
‘TV’ tab, press ‘Next’, then ‘Remote TV’. Press ‘Yes’ to change the setting.
2.
While still in the Manager Mode, press ‘About’ then ‘Software’. Use the chart on Page
4 to find your console minimum software requirement.
d.
If your console is not meeting these requirements, contact Matrix CTS with
the frame and console serial numbers along with what the current software
is. They will supply you with new software.
3.
Press ‘Home’ to exit.
4.
From the frame power socket, recycle the power on the unit.
3x Console Set-Up
Must have Multi-Media Overlay and Earphone board installed
1.
On the Treadmill overlay press and hold
‘Incline Down’ and ‘Speed Down’
and on
other console overlays press and hold
‘Level Down’ and ‘Level Up’
to log into the
Manager Mode. Press ‘Enter’ once Manager Mode appears in the LED window.
2.
Using the ‘Level’ or ‘Speed’ buttons, scroll through until you see ‘Software’. Press
‘Enter’.
3.
Use the chart on Page 4 to find your console minimum software requirement.
e.
If your console is not meeting these requirements, contact Matrix CTS with
the frame and console serial numbers along with what the current software
is. They will supply you with new software.
4.
Press the ‘Pause’ button twice on treadmills or ‘Stop’ button twice on all other units
on the keypad until Manager Mode appears in the LED window.
5.
Using the ‘Level’ or ‘Speed’ buttons, scroll through until you see Engineering in the
LED window. Press ‘Enter’.
6.
Using the ‘Level’ or ‘Speed’ buttons, scroll through until you see ‘Audio Source’.
Press ‘Enter’.
7.
Using the ‘Level’ or ‘Speed’ buttons, scroll through until you see ‘Remote TV’. Press
‘Enter’ to save.
8.
Press and hold ‘Pause’ on the Treadmill console or press and hold ‘Stop’ to exit on
the HURSCE console.
9.
From the frame power socket, recycle the power on the unit.