manualshive.com logo in svg

Matrix simado gfx11, Системное руководство, Страница: 21 / 88

Поделиться
Скачать
Matrix simado gfx11 Скачать руководство пользователя страница 21

Matrix SIMADO GFX11 System Manual

15

•

Insert SIM Card of the service provider in the SIM Card Slot of SIMADO GFX11E.

To enable SIM PIN protection,

•

Get a mobile handset. Insert the SIM Card into the mobile handset.

•

From the mobile handset, enable PIN Protection on the SIM.

•

Change the SIM PIN to 

1234

. This is the default SIM PIN of SIMADO GFX11E.

•

If your SIMADO GFX11E has a 3G module, you must also disable Call Waiting on the SIM Card. 
This will prevent current calls from being disconnected whenever there is a waiting call on the 
Mobile Port.

•

Remove the SIM from the mobile handset and insert it in the SIM Card Slot of SIMADO GFX11E.

•

If you do not want to use PIN Protection, insert the SIM in the mobile handset and disable PIN 
protection. Remove the SIM Card from the mobile handset and insert it in the Mobile Port’s SIM holder.

•

You can change the SIM PIN to the desired value while configuring the system. For instructions on 
changing the SIM PIN, refer 

“Mobile Port Parameters”

.

•

Screw the antenna on to the 

Antenna Connector

 of SIMADO GFX11E. 

Powering ON SIMADO GFX11/GFX11E

•

Connect the Power Adapter into the 

Power Jack

, and plug it into a power outlet.

•

Switch ON the power supply. Also, press the 

ON-OFF button

2

 to switch on your SIMADO GFX11E.

As soon as SIMADO GFX11E is powered on, the battery will also start charging. See 

“Battery Back-up 

during Power Failure”

 for more details.

At first power on, keep SIMADO GFX11E connected to the power supply for atleast 24 hours to enable 
correct and complete battery charging.

•

Observe the reset cycle.

LED Indication at Power ON

•

LED labeled as 

BAT

3

 will start blinking (RED) after few seconds of Power On. It indicates the charging of 

the battery.

•

LED labeled as 

PWR

 will glow green continuously.

•

LED labeled as 

FXS

 and 

RDY

 will blink (RED) four times (500ms On, 500ms Off) and then turns Off.

 

•

LED labeled as 

NW

 will start blinking (RED) after few seconds of Power On. It indicates the network 

availability.

2. ON-OFF button is available only in SIMADO GFX11E. 
3. Battery (BAT) LED is available only in SIMADO GFX11E.

Содержание simado gfx11

























































































Отзывы:

Нет отзывов