Matrix simado gfx11 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 88

Matrix simado gfx11 Скачать руководство пользователя страница 29

Matrix SIMADO GFX11 System Manual

23

Mobile Port Parameters

To configure the Mobile Port Parameters, enter the

SE Mode

.

Enable/Disable Mobile Port

You may disable the Mobile Port, if you want to block making of outgoing calls using SIMADO GFX11. You will
receive incoming calls even when the Mobile Port is disabled.

•

To enable or disable the Mobile Port, dial:

201-Code-#*

Where,
Code is
0 for Disable
1 for Enable

Default:

Enable

SIM PIN

SIM PIN is a security feature used by the GSM network to prevent unauthorized use of the SIM Card. If you have
enabled SIM protection on the SIM Card, you must change the SIM PIN to the desired value. To know more about
enabling PIN protection on the SIM Card, see

“Connecting SIMADO GFX11/GFX11E”

•

To change the current SIM PIN, dial:

113-New SIM PIN-#*

Where,
New SIM PIN can be of minimum 4 and maximum 6 digits. Accepted digits are 0 to 9.

Default:

1234

The

SIM PIN is not set to default or changed, when you

“Reinstate the Default Settings”

.

Your SIM Card is Locked?

If you have enabled PIN protection on your SIM Card, your SIM Card may get blocked, if you enter the wrong
SIM PIN thrice. To unblock your SIM Card, you will need the Personal Unlock Key (PUK). This is the unique
number assigned to the SIM Card by your service provider to unlock your SIM Card. If your SIM Card gets
blocked, you must get the PUK number from your service provider, register this PUK number with the network,
and then assign new SIM PIN.To the register PUK, follow these steps:

•

Enter SE Mode.

•

Dial

114-PUK Number-New SIM PIN-#*

Where,
PUK number is unique 8-digit number assigned to the SIM Card.
New SIM PIN can be of minimum 4 and maximum 6 digits. Accepted digits are 0 to 9.

•

Exit SE Mode.

«
...
27
28
29
30
31
...
»

Содержание simado gfx11

























































































Отзывы:

Нет отзывов