Matrix SETU VGFX, Быстрый старт

Страница: 11 / 36

5. To program Network port Subnet Mask, use command: 12-Subnet Mask-#*
Where,
Subnet Mask is of 12 digits in XXX.XXX.XXX.XXX format. Each octet is of
three digits. Valid range is 0, 128, 192, 224, 240, 248, 252, 254 and 255. For
example, to program Subnet Mask 255.255.254.0, enter the command
12-255255254000-#* . By default, Subnet Mask of VGFX is
255.255.255.000.
6. To exit programming mode, use command: 00#*.
VGFX restarts as soon as IP Address or Subnet Mask is changed.
7. After changing IP Address and Subnet Mask as shown above, open web
browser of the computer connected to VGFX and enter IP Address of VGFX
in the URL of the web browser. Login page of VGFX Web JEEVES will
appear on the screen.
8. Enter default password 1234 in the login page and reach the home page.
Program all the necessary parameters of SETU VGFX one by one by clicking
the links given on the left side of the web page.
Programming SETU VGFX
Once VGFX is switched ON, the SE is advised to program it in the following
sequence:
1.
SIM PIN
2. Date and Time Settings
3. Call Progress Tones
4. Ring Type
5. Mobile Network Selection
6. SIP Trunk Parameters
7. Routing Groups
8. Routing Mechanism
9. Network Port Parameters
After programming VGFX in above mentioned sequence, you will be able to
make and receive calls.
• Open Web browser of the computer connected to VGFX.
• Enter IP Address of SETU VGFX in the URL field and press 'Enter' key.
Login Page of SETU VGFX will appear on the screen.