Matrix SETU VG Series, Быстрый старт

Страница: 13 / 24

Matrix SETU VG Quick Start 7
The default Subnet Mask of the WAN Port is: 255.255.255.0
Connecting to the Mobile Network
Make sure the site you have installed the system has sufficient network signal strength.
Enabling SIM PIN Protection
Protect the SIM Card from unauthorized use with a Personal Identification Number (PIN) on the
SIM (in consultation with the customer/owner of the SIM).
To enable SIM PIN protection,
• Get a mobile handset. Insert the SIM Card into the mobile handset.
• From the mobile handset enable PIN Protection.
• Assign a value as the SIM PIN.
• Remove the SIM Card from the mobile handset.
• If you do not want to use PIN Protection, insert the SIM card in the mobile handset and disable
PIN protection. Remove the SIM Card from the mobile handset and insert it in the SIM Slot of
the SETU VG.
• If your SETU VG has a 3G module, you must disable Call Waiting in the SIM Card before
inserting it into the SIM Slot. This will prevent current calls from being disconnected whenever
there is a waiting call on the Mobile Port.
Inserting the SIM Card
• Insert the SIM Card into the desired SIM Slot, with its contact side facing down.
• Push the SIM Card backwards into the slot. The SIM Card will be locked inside the slot.
To unlock the SIM Card, push the protruded portion of the SIM Card backwards again.
• Repeat the same steps to insert another SIM Card.
• Connect the Antenna to the Antenna Connector.
• SETU VG supports WWAN over the Mobile Port. To use WWAN over the Mobile Port 1, you
must have a 3G module installed in the system and Internet services activated on the SIM.
• At every power on, it takes about 3 minutes for the Mobile Ports to get registered with the
network. Once registration with the mobile network is completed, the Mobile Port can be used.