Safety Instructions
Intended Use
-
The machine is manufactured and designed to generate steam and vacuuming any spilled liquids
and solids which may be experienced whilst using the machine.
-
Wear safety shoes and gloves and any other PPE as specified by local regulations.
-
It is not intended to pick up any hazardous/flammable dust or liquid.
-
The appliance is suitable for commercial use e.g. in hotels, schools, hospitals, factories, shops,
offices and hire shops.
-
Any other use is considered as improper use. Matrix Cleaning Systems Ltd accepts no liability for
any damage resulting from such use. The risk is solely borne by the user.
-
Proper use also includes correct operation, service and repair specified by Matrix.
Transport and Storage
-
Before transporting make sure all the lids are on and fully tightened or locked in place.
-
Only transport and use in an upright position, do not tilt or lie on its side.
-
Protect the unit from rain and frost. Do not store outside or use in the rain.
-
The voltage specified on the type plate must correspond to the voltage of the electrical source.
-
It is recommended that the machine is connected via a residual current circuit breaker with
overprotection switch (max 30mA for 30ms).
-
Please use the mains cable provided by the manufacturer and check for damage regularly. If the
cord becomes damaged please contact your Matrix distributor for replacement (using part code:
11RM00061 for UK plug and 11RM00062 for EU Plug) prior to using the machine again.
-
Inadequate extension cords can be dangerous. If an extension cord is used, it should be suitable
for outdoor use and the connection has to be kept dry and off the ground by at least 60mm.
-
Turn off and remove the plug from the power source when replacing parts or cleaning the
machine.
Appliance Socket
-
The appliance socket is only designed for the purposes defined in the operating instructions. The
connection of different appliances can result in damage.
-
Prior to plugging in the hose, switch off the machine and only use the hoses as specified by the
manufacturer.
-
The machine has a pressure release valve built into the unit which will open if the machine
pressure ever gets too high. This will release from the bottom of the machine, if this happens
please contact your supplier or Matrix for repair or information
-
If liquid or foam escapes from the machine, switch off immediately and contact the distributor or
Matrix direct.
Danger
Danger
Caution
3