Matrix OmniFlow 330, Инструкция по эксплуатации товара

Страница: 8 / 16

OmniFlow 330
6
Finger
Sheet
5 Operation
5.1 Setting
5.1.1 Separator finger adjusting knob
As shown in the following figures. Turn the knob anticlockwise can increase the gap
while clockwise decrease the gap. When the sheets double fed, we need to decrease
the gap. When the sheets get stuck at the entrance, we should increase the gap.
Adjusting knob
5.1.2 Blowing adjusting knob
Turn the knob clockwise can weaken the blowing. When we run smaller and thinner
sheets, we can try weakening the blowing to make it fed smoothly and stably.
Adjusting knob
5.1.3 Upper limiting height adjustment for feeding table
Turn the knob clockwise the table will rise higher. If the sheets get stuck when
feeding, we can turn the knob anticlockwise a little.