14
Oven function
The oven/grill control knob allows the oven temperature to be set as
required. The oven burner is fitted with a flame failure device. This will
shut off the supply of gas to the burner in the event that the flame is
extinguished accidentally.
To light the oven burner:
1. Open the oven door fully.
The oven door must be open during
the ignition process
– the oven is equipped with a safety system
which will prevent the oven lighting if the door is closed.
2. Push in and turn the oven control knob anticlockwise until the
indicator points to the oven
position.
3. Press the knob fully in to activate the ignition. Keep the control knob
pushed fully in for a maximum of 15 seconds to allow the safety
device to detect that the burner is lit.
4.
Close the oven door slowly.
5. Adjust the oven control knob to the required temperature position.
Please note:
If the burner does not ignite after 15 seconds, turn the oven control
knob back to the off position, leave the oven door ajar and wait for at
least one minute before repeating the process above.
If the burner is extinguished accidentally, turn off the control knob and
wait approximately one minute before attempting to relight the burner.
You should allow the oven to preheat for 10 to 15 minutes prior to
starting cooking.