
8
Programming the Oven
Please note:
• The semi-automatic and automatic
cooking programmes will only work
with the
main oven
.
• The alert beep will cut off after
two minutes if it is not switched off
manually.
•
The current time must be set in
order for the functions to work.
If you are unsure whether the
current time is set, switch off the
appliance at the mains power
supply for approximately 10
seconds and then turn it back
on. Set the time as per the below
instructions.
fig. 1
1
2
3
4
5
6
7
1. Cooking time indicator
2. End of cooking time indicator
3. Minute minder indicator
4. Current time indicator
5. Decrease key
6. Mode key
7. Increase key
Setting the clock
The clock is preset to 12:00, and will revert to this after a power failure.
When the current time indicator is flashing, touch or . When
the correct time is shown on the display, the clock will set after
approximately five seconds’ delay.
To change the clock once it has been set, touch repeatedly
until the current time indicator flashes, then touch or . When
the correct time is shown on the display, the clock will set after
approximately five seconds’ delay.
Содержание MD721
Страница 21: ...21 NOTES...
Страница 22: ...22 NOTES...