5 | Version 1 | January 2022
Console Setup
1.
Install the console bracket onto the handlebar, then slide the foam sheet between the handlebar and console
bracket.
2.
Install 4 AA batteries into the console.
3.
Attach the console to the console bracket using 2 screws.
4.
Remove the 4 screws and the handlebar adjustment knob from the frame, then remove the plastic cover.
5.
Plug the unused wire into the RF Sensor.
6.
Using the Velcro, mount the RF Sensor to the Main Frame.
7.
Reinstall the plastic cover and handlebar adjustment knob.
Steps 1-3
Steps 4-5
Steps 6-7
Battery Replacement
Machine Settings
You may adjust settings to customize the console.
Press and hold
and
for 3 to 5 seconds to enter Machine Settings. The console will display “SET” when
ready.
Model Selection
1.
Press
once to enter
the Model Selection page.
2.
Press
to select the
frame model.
3.
Press
to select and set
the frame model.
Brightness Setting
1.
Press
twice to enter
the BL page.
2.
Press
to adjust the
brightness
3.
Press
to set the
selected brightness.
Unit Setting
1.
Press
three times to
enter the Unit page.
2.
Press
to scroll to Miles
or KM.
3.
With your selection
shown, press
to save
and set.
Cleaning the Console
Use a micro-fiber cloth and
to clean the console screen as needed. If you do not have a screen
cleaner, use a damp (with water) micro-fiber cloth instead.
