25
Tips and tricks
If you use press too hard you run the risk of
breaking the tool or damaging the workpiece.
You will achieve the best results by operating the
tool at a constant rotational speed and using a
low contact pressure on the workpiece.
Maintenance and cleaning
Maintenance
Before and after a prolonged period of
non-use fully charge the battery.
Cleaning
Clean all the dirt off the drill / grinder. Use a
dry cloth for cleaning.
Service
WARNING! Have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to
use.
WARNING! If the plug or lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to
use.
Disposal
The packaging comprises exclusively
environmentally-friendly material.
Dispose of it in your local recycling
containers.
Do not dispose of electrical
appliances with your domestic
waste!
According to the European Directive 2002 / 96
/ EC, concerning used electrical and electronic
appliances and its implementation in national
law, superannuated electrical appliances must be
collected and disposed of via an environmentally
suitable recycling facility.
Do not dispose of rechargeable
batteries with your household
refuse!
Defective or worn out rechargeable batteries
must be recycled according to Directive 2006 / 66
/ EC.
Dispose of batteries and appliances over the
existing collection facilities.
Your local communal or municipal authorities
can provide information on how to dispose of the
worn out appliance.
