Matrix 7xe, Руководство по обслуживанию

Страница: 55 / 63

53
10.2 RfiD insTAllATion - conTinUeD
cHAPTeR 10: console sPecificATions AnD AsseMbly gUiDe
1. Remove the console back cover. Connect the Signal connected wire to the Antenna board (Figure A).
2. Put the Antena board on the front cover (Figure B).
3. Put the Fixing Bracket on the Antenna board and use the three screw s to secure it (Figure C).
4. Connect the Signal connected wire to the UCB (Figure D).
5. Use the Tape to hold the Signal connected wire (Figure E).
6. Plug in the Reader board to the UCB and use the two screw s to secure it. (Figure F).
figURe D figURe c
figURe b figURe A
figURe f
figURe e