MSC-XD164S Product Manual
“No Change”. This can be used to incrementally create a preset without changing the active matrix routing.
This command changes preset data which is stored and persists through power cycles.
Command
Description
PSub PRESET, DEST
Remove any existing connection to DEST in PRESET for any level.
PSub PRESET, DEST, LEVEL
Remove any existing connection to DEST/LEVEL in PRESET.
Example
>PSub 1,2
>PSub 1,3,2
>
The first command removes any connection to Destination 2 in Preset 1. The second command removes any
connection to Destination 3/Level 2 on Preset 1.
3.10.33 PView Command
Routers and MSC-GCP2U32 only
View presets. Displays the content of one or all presets.
The format of the returned output is “1:S1[,S2] 2:S1[,S2] ...” where the 1: and 2: are incrementing destination
values, followed by one or more source values (depending on the number of system levels).
Special source values
•
'-' indicates “No Change”, which causes no changes to the given Destination/Level.
•
0 indicates “Mute”
Command
Description
PView
Display all presets.
PView PRESET
Display a single PRESET.
Example on a 16x4 system with 2 levels
>PView 1
1:1,1 2:2,2 3:6,7 4:0,-
>
The above example shows that Preset 1 would cause Destination 1 to be connected to Source 1 for both levels,
Destination 2 to be connected to Source 2 for both levels, Destination 3 to be connected to Source 6 for Level 1
and Source 7 for Level 2 (break away) and Destination 4 to be Muted for Level 1 and “No Change” would be
made for Level 2.
3.10.34 Reboot Command
Instructs the system to reboot, which is done after a brief delay. Ensures that all outstanding data writes are
written to non-volatile memory, prior to the reboot.
Page 43 of 60
© 2013-2016 Matrix Switch Corporation
