system configuration commands.
Mascot versions where a command was added is indicated in parenthesis, (2.3) for example.
Command
Arguments
Description
B
(0 | 1)
Reboot system into Bootloader, typically
used for software update. A 0 or 1 value is
required and selects the Bootloader IP
address. A value of 0 uses 192.168.2.59 and
1 uses configured system IP.
C *
Query system matrix info, which is
displayed in the format
DESTS,SRCS,LEVELS,FLAGS1,FLAGS2.
MtxCfg command supersedes this one.
DestNames *
[DEST][LEVEL]
[LABEL]
Query or assign destination names.
DHCP
[0 | 1]
Query or assign DHCP enable.
E *
[0 | 1]
Query or assign matrix connection echo
enable.
Firmware
Query system firmware version.
FrameIP
[IP]
Remote router IP address the panel will
control.
Gateway
[IP]
Query or assign network gateway IP
address.
IP
[IP]
Query or assign device system IP address.
Lock
Get video lock status and rate detection
information (not all HD router systems are
supported).
MAC
Query system MAC address
MascotVer
Query Mascot protocol version.
MtxCfg * (2.0)
[0-7]
Query current matrix config.
NetMask
[NETMASK]
Query or assign network mask.
(2.1)
[0 | 1]
Query or assign I/O pairing enable (3D
support).
PanelOfs (2.1)
[DEST][SRC]
[LVL1][LVL2]
Query or assign button panel
destination/source offsets and levels to
control. Useful for configuring multiple
panels to control different I/O regions of a
router.
PanelRate (2.1)
[RATE]
Set remote panel refresh rate in seconds.
PsetNames *
[PRESET][LABEL] Query or assign preset names.
Reboot
Reboot the system.
Page 27 of 56
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
