Matrix Switch Corporation MSC-CP16X4E Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 48

background image

MSC-CP16X4E Product Manual

◦

If you are unable to establish a Mascot command connection, use the

Power On Software Update

method.

6. Type the Mascot command “B1” followed by ENTER, utilizing one of the above Mascot connection

methods.

7. A few seconds after entering the above command, initiate the TFTP transfer (hit ENTER on the tftp

command, etc), there is a 30 second time window to initiate the transfer.

8. If the transfer does not complete successfully within 30 seconds, retry from step 3.

4.2 TFTP Software

There are many different options for TFTP client programs, the choice of which depends on what operating
system you are using on the update computer. The following sections list some options for various operating
systems.

4.2.1 Windows XP

Windows XP has a TFTP client installed and enabled by default.

To use the tftp utility on Windows XP:

1. Copy the MatrixFirmware-x.x.x.hex file to somewhere easily accessible from the command prompt.
2. Open a windows command prompt (Start Menu->Run and type “cmd” and ENTER).
3. Execute “cd” commands to navigate to the folder where the firmware file is located.
4. Type the following command to prepare the TFTP transfer (but don't hit ENTER yet):

tftp 192.168.2.59 put MatrixFirmware-x.x.x.hex

5. Make sure to replace 192.168.2.59 with the device's IP address if using the Command Software Update

method and replace MatrixFirmware-x.x.x.hex with the correct version number of the file.

6. To initiate the transfer hit ENTER after typing the above command.
7. The tftp program will indicate if the transfer was successful or not.

4.2.2 Windows Vista and Windows 7

Both Windows Vista and Windows 7 have a command line tftp client, but it must first be enabled.

To enable the tftp utility on Windows Vista or Windows 7:

1. Go to Control Panel -> Programs and Features -> Windows Features and make sure the “TFTP Client” is

checked.

2. Follow the directions for

4.2.3 Mac OSX

Mac OSX comes with a tftp client. It is accessed from the Terminal application.

To use the tftp application on Mac OSX:

1. Copy the MatrixFirmware-x.x.x.hex file to somewhere easily accessible from the command prompt, for

example your home directory at /Users/your_user_name/

Page 42 of 48

Copyright © 2013-2015 Matrix Switch Corporation

www.matrix-switch.tv

«
...
40
41
42
43
44
...
»

Содержание MSC-CP16X4E

















































Отзывы:

Нет отзывов

Похожие инструкции для MSC-CP16X4E

Verizon DSL-2750B

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 4

Бренд: PaloAlto Networks Страницы: 2

Бренд: Rane Страницы: 4

Бренд: Furuno Страницы: 24

Бренд: Fostex Страницы: 20

Бренд: WaiLan Страницы: 27

Бренд: Waves Страницы: 41

Бренд: ProCurve Страницы: 2

Бренд: ETAS Страницы: 82

18x18 Card Cage

Бренд: WolfPack Страницы: 31

Бренд: Supermicro Страницы: 27

Бренд: Gemtek Systems Страницы: 51

Бренд: Kontron Страницы: 19

Бренд: RubyTech Страницы: 25

Бренд: Pressalit Care Страницы: 31

Бренд: Z-Com Страницы: 18

Бренд: Maipu Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды