Matrix Orbital HTT50A/G-IPS, Руководство по оборудованию

Страница: 12 / 18

MATRIX ORBITAL 11 Phone: 403.229.2737
Email: support@matrixorbital.ca
8.1 Standard Type A HDMI
Available in horizontal or vertical.
8.2 HDMI over FFC
Special order, Available in horizontal or vertical configuration. 20 pin, 0.5mm, bottom contact. Pin 1 is closest to
the top edge of PCB for both FPC.
Horizontal FPC is the standard bottom contact. Vertical FPC is contact side facing into the PCB.
Pin 1 2 3 4 5 6 7 8 9 10
Description D2P GND D2N D1P GND D1N D0P GND D0N CLKP
Pin 11 12 13 14 15 16 17 18 19 20
Description GND CLKN NC NC SL SDA GND 5V HDMI HP GND
8.3 Barrel Jack Power Header
Barrel jack power header available in vertical configuration. When choosing an adaptor, please ensure it uses a
2.1mm x 5.5mm center positive barrel jack that conforms to the voltage and current requirements of your display.
Please consult the Power section for details. The display must be powered by the 2 pin MATE-N-LOK header or
barrel jack.
Figure 1: Barrel Jack Power Header
Table 1: Power Adaptor Pinout
Pin Function
1 Vcc
2 Gnd
8.4 Micro MATE-N-LOK Power Header
Low profile power header available in vertical or horizonal configuration. The display must be powered by the 2 pin
MATE-N-LOK header or barrel jack.
Display Header Standard Mate
Micro MATE-N-LOK 2-1445057-2 Micro MATE-N-LOK 1445022-2
Table 2: Power Adaptor Pinout
Pin Function
1 Vcc
2 Gnd
Optional Mate-n-Lok to 2.1mm barrel jack cable adapter.