Matheson 819 Series, Руководство по эксплуатации

Страница: 14 / 48

14
GAS SELEC T™
UP
>Recent
Standard
DOWN P A G E
Gas Select
allows you to set your
device to up to 150 standard gases and
mixes. You can also use
COMPOSER
to
program and store up to 20 additional
gas mixes.
Factory Custom
COMPOSER User Mixes
Bioreactor
Breathing
Chromatography
Fuel
CANCEL SET
Gas Select
is accessed by pressing the
button below
GAS SELECT
on the Select
Menu display.
To select a gas, use the UP and DOWN
buttons to position the arrow in front of
the desired gas category.
UP
> Fuel
Laser
DOWN P A G E
O2 Concentrator
Pure Non-Corrosive
Stack
Welding
CANCEL SET
» Recent: Eight most recent selections
» Standard: Gases and mixes standard
MATHESON instruments (page 29)
» Factory Custom: Present only if customer
requested gases were added at the factory
» COMPOSER User Mixes: Gas mixes
programmed by the user (page 15)
» Bioreactor (page 31)
» Breathing (page 32)
» Chromatography (page 34)
» Fuel (page 33)
» Laser (page 33)
» O2 Concentrator (page 34)
» Pure Non-Corrosive (page 29)
» Stack (page 34)
» Welding (page 30)
Press PAGE to view a new page in the
gas category list.
Press SELECT to view the gases in the selected category. Align the arrow with the
desired gas. Press SET to record your selection and return to the MAIN display.
The selected gas will be displayed on the screen.
*
Pure Corrosive and Refrigerant gases are only available on
S-Series
instruments
that are compatible with these gases.
Note:
Gas Select may not be available on units ordered with a custom gas or blend.
See pages 29 - 34 for a full list of gases in each category.