Matfer CHOCO 15R, Инструкция по эксплуатации и техническому обслуживанию, Страница: 6 / 12

- 6 -
less than required temperature.
•
Set the desired temperature for melting (between 45 and 50°C) and stir the mass
regularly to speed up melting.
•
When the water temperature is at the correct temperature, the intermittent illumina-
tion and extinguishing of the light signal
( ( ( ( (
indicate that the adjustment porcess is
operating correctly.
2 COOLING
•
Remove the container from the machine and set the thermostat at the standing
temperature (about 32°C ofr the dark chocolate). Place the chocolate on a marble
slab.
•
When the chocolate is at correct temperature (about 26°C), replace the container
with the chocolate in the water tank.
In any case, you should refer to the chocolate manufacturer’s instructions, for it use.
3 TEMPERING
•
Allow the chocolate to warm up while stirring from time to time.
•
Check the temperature of the lid before performing the work. You can do it using the
specific thermometer plugged on
D giving you an accuracy of 0,5°C.
4 CLOSING DOWN
•
Turn off the power using key
$ $ $ $ $
.
•
Disconnect the tempering machine.
•
Take out the container.
MAINTENANCE
•
Clean with water containing dishwahing detergent an using a sponge.
•
Do not clean the body of the tempering machine with a jet of water.
•
Do not immerse the tempering machine in water.
•
If the power supply cable is damaged, it must be replaced by the manufactu-
rer, his after-sales service or a person whith similar qualifications to avoid
any danger. The warranty cannot be applied when back side has been
opened.