background image

Important notices 

Page 2 

1 Important notices 

1.1 Personnel qualification 

Installation of safety-related components such as chassis (e.g. axles, wheel sus-
pensions, wheels, etc.), towing and lifting components (drawbars, three-point 
hitches, front hydraulic lifts, intermediate axle lifts), brakes, etc. may be carried 
out only by personnel with the following qualifications: 

  They must have specialized training, for example as an agricultural mechanic 

or auto mechanic, etc. 

  Personnel without qualified training must be supervised by an employee with 

qualified training. 

  They must have read and understood this installation manual. 

  They must be familiar with the relevant safety regulations (accident preven-

tion). 

1.2 Accident prevention 

Safety and accident prevention regulations are governed by the laws of each 
country. The shop foreman or the assigned occupational safety and health spe-
cialist of the company carrying out the work is responsible for compliance with the 
applicable regulations. 

1.3 Symbols used 

 

Use suitable means to ensure that the equipment is in a safe position for 
installation. 

The illustrations in this manual are provided only as an example. They 
cannot be used to define a safe installation position. 

 

Remove the assembly aids. 

 

The assembly steps are explained in the referenced documentation. If this 
documentation is not available to you, please contact matev GmbH. 

 

Assembly steps for which no tools are needed. 

 

Use only suitable tools 

 

Use suitable, calibrated tools and comply with the specified torque for 
threaded connections. 

The torque specification applies to dry screws. 

Содержание TRL-3D 20












Отзывы: