matev MOW-H/M 190 FM, Оригинальное руководство по эксплуатации

Страница: 11 / 22

Mounting the implement
Page 11
Fig. 8: Saw off the profile tube
7. Deburr the sawn edges (see Fig. 9).
Fig. 9: Deburr the sawn edges
8. Repeat steps 4 to 7 on the other half of the universal joint shaft.
9. Grease the profile tube (see Fig. 10).
Fig. 10: Grease the profile tubes
10. Slide the profile tubes together.
4.2.2 Mounting the universal joint shaft
1. Press the locking pin on the outer fork and keep it depressed.
2. Slide the outer fork onto the profile stub of the PTO shaft on the tractor.
3. Release the locking pin.
4. Slightly move the universal joint shaft back and forth until the locking pin audibly
locks in place.
5. Repeat steps 1 to 4 to attach the universal joint shaft on the mower.
6. Hook the universal joint shaft safety chains to a stationary part on the tractor and on
the mower (see Fig. 11).