matev 131 9043 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 32

matev 131 9043 Скачать руководство пользователя страница 8

4

Page 8

4

General safety notices

This chapter summarizes regulations and information that must be observed in connection
with machines.

Depiction of safety information

The safety information in the text is combined with pictograms and signal words which to-
gether indicate the severity of the expected risk

Danger!
Hazardous situations that will result in serious injuries
or death.

Caution!
Hazardous situations that could result in moderate injuries or material dam-
age.

Notice!
Recommendations or information for the operator.
Read this notice. It will facilitate your work.

Intended use

The engine PTO shaft extends the crankshaft of the tractor to the front. It is used to power
sweepers, front-end mowers or similar implements that are driven by PTO shafts. This en-
gine PTO shaft may be mounted only on tractors such as those specified on the cover sheet.

•

The implements and accessories are designed for municipal tractors or carrier vehi-
cles used for comparable work.

•

They may be operated only on carrier vehicles with the power range specified in the
technical data.

•

Intended use also includes compliance with the operating, service, and maintenance
conditions prescribed by the manufacturer.

•

Intended use also comprises the exclusive use of original replacement parts and ad-
ditional equipment or such components and equipment that meet the manufacturer’s
technical requirements.

•

Unauthorized modifications to the implements will void any liability on the part of the
manufacturer.

All other uses are prohibited!

Non-intended use causes:

•

Danger of injury to the operator or third parties

•

Damage to the carrier vehicle and the implements

•

Environmental damage

«
...
6
7
8
9
10
...
»

Содержание 131 9043

































Отзывы:

Нет отзывов