Installation
Page 14
Attention!
If you are mounting the independent live PTO in a tractor that has a cab,
follow the description in sections 3.2.15 and 3.2.16
3.2.15.
Take the left rear tire off of the tractor.
3.2.16.
Mount the M10 and M12 spacers in the tapped bores behind the left rear wheel in
the gearbox block of the tractor. Install the support plate for the battery on the
spacing bolts in the wheel well. Place the battery on the support. Connect the bat-
tery. Use the supplied longer cable. Connect the battery to ground at a suitable
point. Mount the cover and use it to fasten the battery.
Fig. 20 Battery holder in the wheel well
Attention!
If you are mounting the independent live PTO in a tractor that does not
have a cab, follow the description in sections 3.2.17 and 3.2.18
3.2.17.
Mount the battery support element under the running board on the tractor.
3.2.18.
Place the battery on the support. Connect the battery. Use the supplied longer ca-
ble. Connect the battery to ground at a suitable point. Mount the cover and use it
to fasten the battery.
