MateStar BM86, Инструкция

Страница: 8 / 12

To keep the warranty valid, never try to repair
the system yourself. If you encounter problems
when using this Soundmachine, check the
following points before requesting service.
Switch the source selector to TUNER.
Tune to a radio station
(see ‘Listen to radio’ ).
Press to open the cassette holder.
Insert a blank cassette.
Close the holder.
Press to start to record.
To pause, press .
- To resume, press again.
To stop, press .
To pause, press .
- To resume, press again.
To stop, press .
Switch the source selector to CD.
Insert a CD with the printed side facing up.
If you want to record tracks in the desired
sequence, program the desired tracks (see
‘Program play sequence’).
Press to open the cassette holder.
Insert a blank cassette.
Close the holder.
Press to start to record.
The disc/program starts automatically
from the beginning.
During stop, press to search for a
desired passage in a tape.
To stop fast search, press . 1.
2.
Never remove the casing of this Soundma-
chine. -
-
-
Find a passage within a tape
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
-
-
Record from CD
Record from radio
TROUBLESHOOTING
Warning
Ensure that the power cord is connected
securely.
Ensure that there is power at the power
supply socket.
Ensure that the batteries are installed
correctly. -
-
-
Disconnect the AC power cord.
Connect the AC power cord after a few
seconds. -
-
-
-
No power
Ensure that the CD is not damaged or dirty.
Ensure that program/shuffle mode is
deactivated. -
-
The CD skips tracks
Ensure that heads in the cassette holder
are clean.
Ensure that a NORMAL (IECI) cassette
tape is used for record. -
-
Poor cassette sound quality
Ensure that cassette tabs are not broken. -
Cassette does not work for record
Ensure that the disc label is inserted with
the printed side facing up.
Wipe the disc with fibre cleaning cloth from
the centre to the edge in a straight line.
This disc may be defective. Play another
disc.
Ensure that the CD is a finalised CD/CD-R/
CD-RW.
Ensure that the laser lens is clean.
Ensure that the CD is not encoded with
copyright protection technologies. -
-
-
-
-
-
Cannot play disc
Adjust the volume.
Ensure that the track played is of a
compatible format.
No sound
Display does not function properly./No rea-
ction to operation of any of the controls.
7