Matelec FMS-13500 Скачать руководство пользователя страница 2

Страница: 2 / 3

MATELEC AUSTRALIA. P 1800 281 282. F 1300 281 282

[email protected]. WWW.MATELECAUSTRALIA.COM.AU

INSTALLATION

1. Always isolate mains power prior to installation.

2. Remove cover by turning anti-clockwise and remove the 2 screws as shown in Fig 1.

3. Use the base to mark the drill holes on the mounting surface.

4. Drill holes and insert wall plugs if required.

6. Connect the power wire and the load wire to the connection terminal according

to the electrical connection Fig 2. Do not exceed the max rated load.

7. Replace & secure base cover, calibrate (Fig 3) and replace front cover.

fig.1

fig.2

fig.3

fig.1

fig.2

fig.3

Important:

1. This microwave sensor cannot penetrate through metal objects.

2. For reliable operation, avoid installing in areas with notable air turbulence or ceiling movement

N L' L

Fig. 1

Fig. 2

Fig. 3

ELECTRICAL CONNECTION (FIG 2)

Connect N and L with power

Connect N and L1 to the load

All electrical installations must be carried out by a suitably qualified and registered electrician

Содержание FMS-13500

Страница 1: ...ar ISM Band 10mW Min 5 seconds Max 12 minutes 1200W Incandescent 200W Fluoro 2 20m diameter adjustable 360 No IP20 3 year 3 wire FMS 13500 MOTION SENSOR INSTRUCTIONS The FMS 13500 Microwave Sensor is...

Страница 2: ...oad wire to the connection terminal according to the electrical connection Fig 2 Do not exceed the max rated load 7 Replace secure base cover calibrate Fig 3 and replace front cover fig 1 fig 2 fig 3...

Страница 3: ...The light will only switch on in response to movement once this period has elapsed Light control setting The chosen light response threshold can be adjusted from approx 2 2000lux Turn it fully anti c...