Dimensions in Inches(millimeters) mate.com
Mate Precision Technologies • 1295 Lund Boulevard • Anoka, Minnesota 55303 USA • Phone +1.763.421.0230 • 800.328.4492 • Fax +1.763.421.0285 • 800.541.0285
The Mate Logo is a registered trademark of Mate Precision Technologies Inc.
© Mate Precison Technologies Inc.
LIT01233 Rev B
MATE 2-PIN LINE UP TOOL
USAGE INSTRUCTIONS
ALIGNMENT PROCEDURE (CONT.)
Step 6a (cont.)
Step 6b
Step 6a
Step 7
5.
Rotate to the active punching station (under the machine ram) and engage the
machine turret alignment pins.
6a. To adjust the Alignment Punch remove the piece of metal and then lower the Alignment Punch to engage the
Alignment Punch Pins completely into the mating die holes.
6b. Use the Alignment Rod (NALR0D) to adjust the station until the 2 pins engage fully with the holes.
7.
Bolt on the Alignment Bar (VNALTBAR*) as shown using the center hole on
the alignment bar. Torque (1) M4 X 25 socket head cap screw (SHC11914)
included to no more than 5.0 N-m or 44 in-lb.
*OPTION: For easier access to check angularity Mate suggests the purchase
and use of a larger alignment bar (MATE02227).
*ALTERNATE: Finn-Power 20, 30, 40 and 50 series presses, Nova presses and
Strippit presses the Alignment Bar (NLUBAR) may be used.
Step 5
