Matco T7 PRO CC, Основное руководство

Страница: 5 / 35

Basics Manual
4
2.2
Qualified personnel
Our definition of "qualified personnel" in this context is "personnel with a thorough knowledge of the
equipment itself and how to operate and maintain it safely". Qualified personnel must be physically fit
enough to perform the necessary tasks, have a good knowledge of all the relevant safety precautions
and be trained to install, operate and/or maintain the equipment safely. The company using the
equipment is responsible for ensuring that the personnel comply with these conditions.
2.3
Accident prevention
1. Before starting to work with the installation, the manual must first be studied.
2. Use of the installation by unauthorised personnel is prohibited.
•
3. Never allow persons to use the equipment if they are under the influence of medication that
may impair reaction times or are not in physically fit condition for operating the installation.
4. Ensure at all times that work / maintenance / service on the installation is done safely and
without voltage. Make sure that the installation cannot be switched on accidentally by locking
the main switch.
5. Safety guards must be checked before starting the machine
–
they may not be loose or
removed. This also applies to the foot protection under the film carriage.
•
6. If it is necessary to remove any safety device to allow installation, repairs or maintenance, the
safety device must be replaced immediately after completing the task.
•
7. Keep limbs and clothes away from rotating parts. Do not wear neckties or loosely hanging
clothes when using or maintaining machines with rotating parts. Remove wristwatches, chains
and similar jewellery. Cover or tie up long hair before carrying out any task on or with the
machine.
•
8. Only machines with a suitable protection rating may be used in humid conditions.
•
9. Do not use the equipment in an area with risk of explosion.
•
10. Always use the equipment in a well-ventilated space.
•
11. If a pneumatic hold-down plate is used, the supply air line will remain under pressure when
entering the danger zone. Other parts will become voltage / energy-free .
Dangerous situations may result from failure to comply with the
conditions listed above.