Content
Delay Time
Settings
Display
position
5
0.2S
7
0.4S
9
0.6S
11
0.8S
13
1.0S
Delay
time
Display
position
5
Grind
model
7
Low
9
Mid
11
High
13
Max
Status
5, 7, 9, 11, 13
Long press "SHADE" button for 2S to shift between 2 modes
Switch into sensitivity mode 5 position, goggle enters into Grind mode and stay in
DIN4 light state and not darken
When the volume of battery is less than 2.4V, LOWBAT indicator will turn red.
Power on: Press the "ON" button once, then the LED light blinks 5 times and it
enters standby mode.
Manually off: Press the button lasting 2S, when the LOWBAT light is on, then release
the button.
Automatically off: Goggle will automatically turn off after 10 minutes in inactive mode
Sensitivity
Settings
Shade
Settings
Grinding
Settings
Power
On/Off
Low Volume
Alarm
Function
Button
DELAY
SENS
SENS
ON
BATT
SHADE
3
2
SPECIFICATIONS
Model
View Area
Cartridge Size
Cover Lens Size
UV/IR Protection
Light State
Optical Class
Dark State
Delay Time
Sensitivity
Power On/Off
Sensors
Grinding
Sensitivity Control
Delay Control
TIG Rating
Battery Type
Operating Temperature
Storage Temperature
WG3000/WG3000S
111 x 42mm
196 x 212 x 92mm
158 x 58.6 x 1.0mm
DIN 13
DIN 4
1/1/1/2
External variable shade #5, #7, #9, #11, #13
Mode 1: #5, #7 | Mode 2: #9, #11, #13 (long press the "shade" button from
Mode 1 to Mode 2)
5 adjustments by button from fast to slow (0.2S, 0.4S, 0.6S, 0.8S, 1.0S)
5 adjustments by button from low to high (Grind mode in position 5. Welding
mode from low to high sensitivity in position 7, 9, 11, 13)
Manually on/manually long press "power" button for 2 seconds or automatically
shut off after 10min in inactive mode.
2
Yes (when sensitivity button is in position 5)
Yes
Yes
>5 AMPS
Replaceable CR2450 lithium batteries
-5˚C ~ +55˚C
-20˚C ~ +70˚C
1
2
3
4
5
6
Cover Lens
Arc Sensor
Rubber Lining
Auto-Darkening Filter I
Digital Control Panel
Elastic Headband
PART #
DESCRIPTION
• Connect work cable to the work as close to the welding area as practical to prevent welding current from traveling
long, possibly unknown paths and causing electric shock and fire hazards.
• Never use arc welder to thaw frozen pipes.
• Remove electrode from holder when not in use.
• Wear oil-free protective garments such as leather gloves, heavy shirt, cuff-less trousers, high shoes, and a cap.
• Remove any combustibles such as lighters or matches from your person before doing any welding.
FLYING METAL CAN INJURE EYES
• Wear ANSI approved safety glasses with side shields under your welding goggles.
• Welding, chipping, wire brushing, and grinding cause sparks and flying metal. As welds cool, they can throw
off slag.
HOT PARTS CAN CAUSE SEVERE BURNS
• Never touch hot parts bare handed.
• Allow adequate cooling period before touching work piece.
NOISE CAN DAMAGE HEARING
• Noise from some processes or equipment can damage hearing.
• Wear approved ear protection if noise level is high.
GENERAL INFORMATION
• WG3000/WG3000S Welding Goggles do not protect against severe impact hazards such as fractured grinding
wheels or abrasive disks, explosive devices, or corrosive liquids. Machine guards or eye splash protection must be
used when these hazards are present.
• The auto-darkening welding filters are designed for arc welding or cutting applications. The unit is suitable for all arc
welding processes such as MIG, MAG, TIG, SMAW, Plasma, Arc, and Carbon arc.
• This auto-darkening welding filter is not recommended for overhead welding applications, laser welding, or laser
cutting applications.
• In the event of electronic failure the welder remains protected against UV and IR radiation according to shade 11.
• The auto-darkening welding filter should always be used with the original or OEM replacement cover lenses.
• The manufacturer is not responsible for any failure due to modifications to the welding filter or the use of the filter
from any other manufacturer’s helmet.
• If protection levels are not common to different parts of the protective equipment, the lower protection level shall
be assigned.
1
2
4
2
5
6
3
NOTE:
1. Protectors which exhibit broken parts, distortion, or excessive scratches on the lens are unsuitable for use and shall
not be worn.
2. User shall make a visual inspection of their protector prior to each use.
3. Eye and face protectors that have been subject to an impact shall not be used and shall be discarded and replaced.
OPERATION:
BEFORE WELDING
1. Please verify whether the protection film of exterior and interior glasses has been removed.
2. Please make sure that battery is full of charge if it has not been used for a long time.
3. Please verify whether display of ADF is normal if it has not been used for a long time.
4. Please verify whether solar cell is damaged or blocked by dust, and whether arc sensor is clean.
5. Please check all operating parts to see whether they are worn off or damaged. Any scratched or broken parts should
be replaced immediately so as not to incur personal injury.
6. The welding hood must be worn underneath the welding goggles and mask.
7. Please verify strap tightness before each use.
8. Please choose the right shade number according to the types of welding machines and current of welding.
DIGITAL CONTROL PANEL