RL835 3/13/02
This Instruction Manual Contains Important Safety
Information.
Read THIS INSTRUCTION
MANUAL Carefully and understand
ALL INFORMATION Before
Operating THIS Tool.
•
Always operate, inspect and
maintain this tool in accordance with American
National Standards Institute Safety Code of
Portable Air Tools (ANSI B186.1) and any
other applicable safety codes and regulations.
•
For safety, top performance and maximum
durability of parts, operate this tool at 90 psig
6.2 bar max air pressure with 3/8" diameter air
supply hose.
• Always wear impact-resistant eye
and face protection when operating
or performing maintenance on this
tool. Always wear hearing
protection when using this tool.
• High sound levels can cause
permanent hearing loss. Use
hearing protection as
recommended by your employer or
OSHA regulation.
•
Keep the tool in efficient operating condition.
•
Operators and maintenance personnel must
be physically able to handle the bulk, weight
and power of this tool.
• Air under pressure can cause severe injury.
Never direct air at yourself or others. Always
turn off the air supply, drain hose of air
pressure and detach tool from air supply
before installing, removing or adjusting any
accessory on this tool, or before
performing any maintenance on this
tool. Failure to do so could result in
injury. Whip hoses can cause
serious injury. Always check for
damaged, frayed or loose hoses
and fittings, and replace immediately. Do not
use quick detach couplings at tool. See
instructions for correct set-up.
• Air powered tools can vibrate in
use. Vibration, repetitive motions or
uncomfortable positions over
extended periods of time may be
harmful to your hands and arms.
Discontinue use of tool if discomfort,
tingling feeling or pain occurs. Seek medical
advice before resuming use.
•
Place the tool on the work before starting the
tool.
• Slipping, tripping and/or falling
while operating air tools can be a
major cause of serious injury or
death. Be aware of excess hose left
on the walking or work surface.
•
Keep body working stance balanced and firm.
Do not overreach when operating the tool.
•
Anticipate and be alert for sudden changes in
motion during start up and operation of any
power tool.
• Do not carry tool by the hose.
Protect the hose from sharp objects
and heat.
• Cutting with these tools will create
sharp edges. Wear gloves to protect hands.
•
Avoid direct contact with accessory and work
surface during and after work.
•
Cutting edges and saw blades can become hot
during use. Do not touch.
•
Never force the tool to cut faster or through
heavier gauge material than rated capacity.
• Do not lubricate tools with flammable or
volatile liquids such as kerosene, diesel or jet
fuel.
• Don’t force tool beyond its rated capacity.
• Do not remove any labels. Replace any
damaged labels.
WARNING!
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY
