PAGE 4 OF 6 | AU SUPPORT 1800 237 425 WWW.MATCHMASTER.COM.AU | NZ SUPPORT 0800 237 425 WWW.MATCHMASTER.CO.NZ
To upload settings from a SD card, tap LOAD SD PRESET.
This will copy the configuration file from the SD CARD to
the device.
To avoid unauthorized people changing the settings, all
Profiler products can be locked with a security code.
Select LOCK and SET LOCK CODE. When the lock code is
set, the device will shut down.
When you restart the device, you will now have to enter the
correct lock code. Note: If you forgot the lock code, you
can always use the value 50. This master code is fixed and
cannot be changed.
To save the device settings on the SD CARD, go to SAVE SD
PRESET and tap on CREATE PRESET.
It is possible to create multiple presets. Therefore, tap
CREATE PRESET after each modification of the settings. To
delete all presets, press DELETE ALL.
Exit Settings
SD Card Settings
Inputs
4 VHF/UHF + 1FM
Outputs
1 main (FM-VHF-S-UHF) + 1 test port
(-30dB)
Frequency Range
FM: 88-108MHz
VHF: 174-240MHz
UHF: 470-862MHz
LTE protection
Automatic selection: 694MHz, 790MHz
or OFF
Input level
FM: 37-77dB
µ
V
VHF: 37*-109dB
µ
V
UHF: 37*-109dB
µ
V
FM Output power
(60dB/IM3)
113dB
µ
V
VHF/UHF Output
power (60dB/IM3)
120dB
µ
V
VHF/UHF Output
power (36dB/IM3)
131dB
µ
V
VHF/UHF Output
power with 1 MUX
118dB
µ
V
VHF/UHF Output
power with 6 MUX
114dB
µ
V
Conversion
Yes (from any VHF-UHF channel to any
VHF-S-UHF channel)
Add channels
Per 1, 2, 3, 4, 5 or 6 MUXes
Number of
channels
More than 50 (32 filters)
Gain
FM: 35dB
VHF: >75dB
UHF: >75dB
Gain adjustment
FM: 20dB
VHF/UHF: Channel AGC
General attenuator 20dB
VHF/DAB
attenuator
15dB
Slope adjustment
15dB
Noise Figure
7dB
Selectivity
50dB/1MHz
Output MER
VHF: 35dB
UHF: 35dB
ESD protection
All inputs
Remote voltage for
preamp
12 or 24V
Remote current
100mA (total for the 4 inputs)
SD port
Yes (for copy configuration and
upgrade features)
Operating
temperature
-5 to +50°C
Power Supply
100-240Vac
Power
consumption
15W
Dimensions
217x165x59mm
Weight
0.8kg
* For 64QAM with code rate 3/4
2. TECHNICAL SPECIFICATIONS
Tap FW VERSION to check the firmware version of the
device. Tap SERIAL NUMBER to check the serial number of
the device. To format the SD CARD, tap FORMAT CARD.
Note: You can convert any single input Channel, to any
output Channel position (including output S-channels). But
you can only convert a group of input channels to a group
of output channels with the same channel spacing.
Some examples:
21:23 > 31:33
Can be converted because groups of
channels have same channel spacing
07:07 > S15:15
Can be converted because single channel
conversion
07:07 > S35:35 Can be converted because single channel
conversion (Even though channel spacing
and bandwidth is different)
07:08 > S35:36 Can’t be converted because groups of
channels have different channel spacing
If you do not want to work with a lock code, go to EXIT and
tap NO LOCK.
