Step 8
Select boom and clip the X type elements onto 'U' shaped
plastic insulators on the boom ensuring the
clips fit securely onto insulator on boom.
Step 9
Then attach the Dipole
as per diagram ensuring
that the X dipole is
positioned towards
the front of the
Antenna.
Step 11
Assemble tilt bracket to boom in
centre position.
See diagram.
Step 12
Attach antenna to mast and point to transmitter as
per diagram. Rotate antenna to achieve best results.
Attach cable to mast with UV grade insulation
tape or UV grade cable ties to support
cable weight and avoid damage to
connection from wind whipping
cable from side to side.
Step 13
For digital compatibility terminate cable into suitable “F” type splitter such as 07MM-GM02 or 07MM-GM04
or “F” outlet plates such as 05MM-COF1.
NB
RG6 cable alfoil albraid is ideal for digital reception.
N.B.2 If close to transmitter use 07MM-FQ02 Quad shield flylead to avoid interference.
Step 10
Then attach
corner reflector
using the two
screws and wing
nuts provided
as per diagram.
To Transmitter
DG91 7-13
For any technical enquiries, please call our technical department
at Matchmaster on 1800-AERIAL
(N.Z. 0800-AERIAL).
