20MM-LT10L Optical Transmitter Operating Manual
- 8 -
4. Installing the 20MM-LT10L Optical Transmitter
4.1
Receiving and Inspecting
As you unpack your unit, inspect the shipping container and equipment for damage.
Save the shipping material for future use. If the container or the equipment is
damaged, notify both the freight carrier and Matchmaster.
CAUTION:
To protect yourself from potential injury and to protect the
equipment from further damage, do not perform any
operational tests if the equipment appears to be damaged.
4.2 Precautions
Heed the following precautions when working with the 20MM-LT10L.
Warning
Read the installation instructions before connecting the
system to the power source.
Warning
The power socket ends must be accessible at all times, as it
serves as the mains disconnection.
4.3 Mounting the 20MM-LT10L
4.3.1 Mount the 20MM-LT10L
in a cabinet
To mount the 20MM-LT10L in a standard 19-inch equipment cabinet:
1.
Place the unit in the cabinet.
2.
Use four mounting screws to attach the mounting ears on the front panel to the
cabinet.
3.
Reliably ground the equipment, the ground terminal is on the rear panel.
4.
Visually inspect each key (button) on the front panel to ensure that it is not
trapped under the edge of its hole. If a key is trapped, tap the key to enable it to
move freely.