background image

8- ENG 

HAZARd

 

RISK OF UNSAFE OPERATION

wHAT CAN HAPPEN

HOw TO PREVENT IT

•  Unsafe op er a tion of your 

compressor could lead to se ri ous 

in ju ry or death to you or others.

•  Review and understand all 

instructions and warnings 

in this manual.

•  Be come fa mil iar with the op eration 

and con trols of the air compressor.

•  Keep operating area clear of all 

persons, pets, and obstacles.

•  Keep chil dren away from the 

air compressor at all times.

•  Do not operate the product 

when fatigued or under the 

influence of alcohol or drugs. 

Stay alert at all times.

•  Never defeat the safety fea­

tures of this prod uct.

•  Equip area of operation 

with a fire extinguisher.

•  Do not op er ate machine 

with missing, broken, or 

un au tho rized parts.

HAZARd

 

RISK OF FALLING

wHAT CAN HAPPEN

HOw TO PREVENT IT

•  A portable compressor can fall 

from a table, workbench, or roof 

causing damage to the compressor 

and could result in serious injury 

or death to the operator.

•  Always operate compressor in a 

stable secure position to prevent 

accidental movement of the unit. 

Never operate compressor on a 

roof or other elevated position. Use 

additional air hose to reach high  

locations.

Содержание C151I






















Отзывы: