Manual Instructions for Gas Fryer
14
9. If the appliance has not preset to the gas availability, you must convert it into another gas type.
Authorized personnel must do this by referring to the technical data (primary air regulation and
nozzle table), changing the main burner and pilot burner nozzles. Once this has been done, a
new rating data plate should be affixed to the new data by referring to the new gas type.
•
Position and Fixing
Authorized personnel must do the installation. Install the appliance according to National
Safety Standard about gas-heated standard. Place the appliance in good ventilated room with
permanent ventilation ducts to guarantee sufficient exchange of air and keep the work place
healthy. If the Gas Fryer not connected to a flue, it is recommended to install it under efficient
hood, which could evacuate burned gases and cooking steams.
Below is construction type according to National Regulations:
-
A
1
: Appliance without fan and does not have connection to a flue or to a device for
evacuating combustion products outside the room. The combustion air and burned gas
mixed in one room.
-
B
11
: Natural draught appliance connected with draught diverter. It is attached to a flue,
which evacuate combustion products outside.
-
B
21
: Natural draught appliance without draught diverter. It is not directly connected to a
flue, which evacuate combustion products outside.
Make sure that any object around or under Gas Fryer does not obstruct air volume required for
combustion. Put away any flammable materials near Gas Fryer. When the appliance is
freestanding, keep a distance at least 10 cm from side, and rear walls. Especially when the
appliance close to wall and does not protected with fire-resistant materials made. Install the
appliance separately or side by side with other appliance according to recommended range.
Warning!
NEVER USE FREE FLAME TO FIND GAS LEAKS!
