Mastip Hot Half System, Руководство по настройке

Страница: 61 / 64

61
© Copyright Mastip Technology Limited. Information subject to alteration. V3.20 www.mastip.com
System Selection Guide
Sequential Control System
G-Series GTV8 Integrated Sequential Controller
1.
GTV8 FEATURES
• Regulation of the injection quantity from
each individual gate
• Quality of the moulded part can be
improved by removing or repositioning of
weld lines
• Injection is performed with minimum
clamping force due to the gates not all
opening simultaneously
• Optimum control over part fill
• Pneumatic only
• Standard GTV8 cabinet configurations
are 8 zones compact design
Technical Specifications
Mains input power Single phase AC 220V (50/60 Hz)
Injection signal input power supply 24VDC, 220VAC
Solenoid output power supply Signal voltage, 100mA/Zone
Operating temperature range -10 ºC to 50 ºC
Operating modes Two modes (Continuous Sequence and Intermittent
Sequence)
Timer Increment 0.1 seconds
Timer Range 0 - 999 seconds
Automatic input voltage Yes
Manual override Yes