Masterwork Automodules Tech NC-3000 Series, Руководство по эксплуатации, Страница: 24 / 32

24 Masterwork Automodules Tech Corp Ltd
Open Bill Path
Cleaning NC-3000
Cleaning the cover of NC-3000
Occasionally clean NC-3000 as follows:

Prepare a mixture of a gentle kitchen-use detergent (one that does not
contain abrasive powder or strong chemicals such as acid or alkaline.) Use 5
parts water to 1 part detergent.

Absorb the diluted detergent into a sponge.

Squeeze excess liquid from the sponge.

Wipe the cover with the sponge, use a circular motion and take care not to let
any excess liquid drips into the interior of the device.

Wipe the surface to remove the detergent.

Rinse the sponge with clean running water.

Wipe the over with the clean sponge.

Wipe the surface again with a dry, soft lint-free cloth.

Wait for the surface to dry completely and remove any fibers.
Cleaning the bill path of NC-3000

Open the upper bill path.

Gently wipe it or dust the bill path with a MA brush or a dry, soft lint-free cloth.

If stains remain, moisten a soft, lint-free cloth with water or a 50-50 mixture
of isopropyl alcohol and water that does not contain impurities.

Wring out as much of the liquid as you can.

Wipe the bill path and the sensor surface again; do not let any liquid drip into
the device.
*NOTE: Avoid spraying cleaner directly on the device, and be sure to day the bill
path before closing it.