Masterweld MW 8100, Руководство пользователя и по обслуживанию

Страница: 7 / 16

MW 8100
PORTABLE WELDING FUME EXTRACTOR MW 8100
4. P
RELIMINARY CHECKS AND INSTALLATION
When supplied, the machine is contained in a single packaging. The operator shall do as follows:
•
Unload the packaging
•
Carry out the unpacking
•
Make sure that the packaging contains all parts and that they were not damaged during
transport otherwise contact our Reseller.
•
Place the flexible hose on the inlet flange of the machine and fasten it by means of the
hose clamp.
•
Connect the power supply cable to the main electric grid (after making sure that the
supply voltage/frequency are 110 V/50 Hz);
•
Use the machine as described in paragraph 3.1 Use direction .
Before connecting the machine to the main electric grid,
make sure that the ratings on the machine correspond
the ones of the supply mains