6
EN / EasyCharge 6 and 10 Amp - User’s Manual
BATTERY CHARGING
Charging can be stopped at any time by
disconnecting the mains plug from the wall socket.
The Easycharge 10-2A has two charge outputs. It
can quickly charge two batteries using the Sense-
Send Technology. The charger senses the power
needed per battery and sends the allocated power
needed.
If the two batteries connected to the charger have
different discharged levels, the charger will send the
majority of the available power to the battery needing
the most power and a lower amount to the battery
needing less power. This results in faster charging.
If the two batteries have drained equally, the charger
will send the same amount of power to each battery.
MAINTENANCE
Examine your electrical installation on a regular base,
at least once a year. Defects such as loose
connections, burnt wiring etc. must be corrected
immediately.
If necessary, use a soft clean cloth to clean
enclosure of the battery charger. Do not use any
liquids or corrosive substances, such as solvents,
alcohol, petrol or abrasive components.
STATUS LEDS
LED illuminated
Meaning
Charging
Ready
RED
(OFF)
REGNERATION or BULK stage. The battery is being charged
RED GREEN
ABSORPTION
stage
(OFF)
GREEN
FLOAT stage. The battery is fully charged now
8 Amps
2 Amps
10 Amp
charger
5 Amps
5 Amps
10 Amp
charger