Mastervolt Chargemaster 12/100-3 Скачать руководство пользователя страница 6

IMPORTANT SAFETY INSTRUCTIONS 

7

 

2.3  WARNINGS REGARDING THE USE OF 

BATTERIES 

1  Someone should be within range of your voice or 

close enough to come to your aid when you work near 
a lead-acid battery.  

2  Have plenty of fresh water and soap nearby in case 

battery acid contacts skin, clothing, or eyes. 

Wear complete eye protection and clothing protection. 
Avoid touching eyes while working near battery.  

4  If battery acid contacts skin or clothing, wash 

immediately with soap and water. If acid enters eye, 
immediately flood eye with running cold water for at 
least 10 minutes and get medical attention 
immediately.  

5  NEVER smoke or allow a spark or flame in vicinity of 

battery or engine.  

6  Do not short circuit batteries, as this may result in 

explosion and fire hazard! Be extra cautious to reduce 
risk of dropping a metal tool onto battery. It might 
spark or short-circuit battery or other electrical part 
that may cause explosion.  

7  Remove personal metal items such as rings, 

bracelets, necklaces, and watches when working with 
a lead-acid battery. A lead-acid battery can produce a 
short-circuit current high enough to weld a ring or the 
like to metal, causing a severe burn.  

8  Only use Chargemaster for charging a LEAD-ACID 

batteries and the supply of users attached to these 
batteries, in permanent systems. Do not use 
Chargemaster for charging dry-cell batteries that are 
commonly used with home appliances. These 
batteries may burst and cause injury to persons and 
damage to property.  

NEVER charge a frozen battery. 

10  Excessive battery discharge and/or high charging 

voltages can cause serious damage to batteries. Do 
not exceed the recommended limits of discharge level 
of your batteries.  

11  If it is necessary to remove a battery, always remove 

grounded terminal from battery first. Make sure all 
accessories are off, so as not to cause an arc.  

12  Be sure that the area around battery is well ventilated 

while battery is being charged. Refer to the 
recommendations of the battery manufacturer.  

13  Batteries are heavy! It may become a projectile if it is 

involved in an accident! Ensure adequate and secure 
mounting and always use suitable handling equipment 
for transportation. 

2.4  WARNING REGARDING LIFE SUPPORT 

APPLICATIONS  

The Chargemaster is not sold for applications in any 
medical equipment intended for use as a component of 
any life support system unless a specific written 
agreement pertaining to such intended use is executed 
between the manufacturer and Mastervolt. Such 
agreement will require the equipment manufacturer either 
to contract additional reliability testing of the Chargemaster 
and/or to commit to undertake such testing as a part of the 
manufacturing process. In addition the manufacturer must 
agree to indemnify and not hold Mastervolt responsible for 
any claims arising from the use of the Chargemaster in the 
life support equipment.  

2.5 

GUARANTEE SPECIFICATIONS  

Mastervolt guarantees that this unit has been built 
according to the legally applicable standards and 
specifications. Should work take place, which is not in 
accordance with the guidelines, instructions and 
specifications contained in this users manual, then 
damage may occur and/or the unit may not fulfil its 
specifications. All of these matters may mean that the 
guarantee becomes invalid.  
The guarantee is limited to the costs of repair and/or 
replacement of the product. Costs for installation labor or 
shipping of the defective parts are not covered by this 
guarantee. 

Содержание Chargemaster 12/100-3



































Отзывы: