Basic operation
Masterlink BTM-III
Mastervolt International B.V,
P.O.Box 22947, NL-1100 DK Amsterdam, The Netherlands.
Tel.:
+31-20-3422100
Email:
Web:
www.mastervolt.com v1.1 061113EN
Use
Set
for adjustments
The
Masterlink BTM-III
is the fuel gauge for up to three battery banks
NOTE: Displayed data may differ.
25.54V - 29.3A
42% 25:14
Select
25.5 24.5 12.6V
80%
Select
Ah CONSUMED
- 86.0 Ah
Select
POWER BANK-1
25.5
POWER BANK-2
24.5V SOC: 75%
POWER BANK-3
12.6V
Select
The
LED bar
shows how full the main battery set is (bank 1): each LED represents 16% of the total capacity.
Use
Select
shortly to scroll through the menus
If you hold
Select
pressed for approximately 3
seconds, several advanced
Submenus
can be
entered (see below)
Press
Select
several
times to show the
actual data of each
battery bank
individually
This screen is displayed
by default.
It shows the voltage
(Volt), current (Amps),
state of charge (%) and
time-to-go (hrs:min) of
the main battery (battery
bank 1)
Press
Select
shortly.
The next screen shows
the actual capacity
consumed from the
main battery (battery
bank 1)
Press
Select
again for a quick
status overview of all battery
banks simultaneously.
It shows the Battery voltage of
all battery banks and the
State Of Charge (SOC)
The
Main menu
(chapter 6) provides a quick status overview of your batteries. Just press
Select
shortly to scroll.
25.54V - 29.3A
42% 25:14
This
green LED
indicates that the main batteries are full (96-100% State Of Charge).
If you hold
Select
pressed for approximately 3 seconds, several advanced
Submenus
can be entered (chapter 7)
BANK 1
SET TO ENTER
BANK 2
SET TO ENTER
BANK 3
SET TO ENTER
Select
Set
Set
Set
Select
SETTINGS
SET TO ENTER
Set
EXIT LEVEL
PRESS SET
Select
HISTORICAL
SET TO ENTER
Select
Historical data menu
(see chapter 8).
This menu shows
the history of your
battery set(s)
Battery Bank menus
(1, 2 and 3) (see chapter 9).
Used to adjust the Masterlink
BTM-III in accordance with
the specifications of each
battery set and to adjust the
trigger points for the alarm
function of each battery set.
Settings menu
(see chapter 10).
General settings like
language, energy save
mode and advanced
settings for each battery
bank. Here you can also to
reset the Masterlink BTM
III back to the factory
settings
From here you can
return to the main
menu (see above) by
pressing
Set
shortly.
Also if none of the
buttons was touched
for 40 seconds, the
Masterlink BTM-III
returns to the main
menu.
