headline bars
continuation tabs
notes
warnings
6
model no. 054-7548-8 | contact us 1-800-689-9928
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet
.
Never modify the plug in any way. Do not use any
adaptor plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase
the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use
of a cord suitable for outdoor use reduces the risk of electric shock.
•
If operating a power tool in a damp location is unavoidable, use a ground-fault circuit
interrupter (GFCI) protected supply.
Use of a GFCI reduces the risk of electric shock.
PERSONAL SAFETY
•
Stay alert, watch what you are doing, and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
A moment of inattention while operating power tools may result in serious personal
injury.
•
Use personal protective equipment. Always wear eye protection.
Protective equipment such
as a dust mask, non-skid safety shoes, a hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
•
Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to the power source and/or battery pack, or picking up or carrying the tool.
Carrying power
tools with your finger on the switch or energising power tools that have the switch on invites
accidents.
•
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times.
This enables better control of
the power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
•
If devices are provided for the connection of dust extraction and collection facilities, ensure
that these are connected and properly used.
Use of these devices can reduce dust-related
hazards.
POWER TOOL USE AND CARE
•
Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and more safely at the rate for which it was designed.
SAFETY GUIDELINES
Содержание 054-7548-8
Страница 2: ...headline bars continuation tabs notes warnings ...
Страница 20: ......
